Home Team Field Setup

1. Unlock equipment box marked BCSL. Combo needed. Box at each diamond for 2020 (look for the one that is marked BCSL).
2. Take out the bases and the white pegs, spray liner, dig-out tool, shovel, and rake.
3. Locate & install first base which should have two orange base plugs. Dig out holes for base pegs if needed using the shovel. (Marked on fence with white paint and on the ground with orange or red whisker). 
4. Locate & install second base (look for the orange base plug). Dig out hole for base peg if needed using the shovel. (Marked on the ground with orange or red whisker)
5. Locate & install third base (look for the orange base plug). Dig out hole for base peg if needed using the shovel. (Marked on fence with white paint and on the ground with orange or red whisker)
6. Line a straight line perpendicular to the third base line at the 20 ft mark (marked on fence/backstop with white paint) with white spray liner if available.
7. Line a straight line perpendicular to the third base line from the front corner of home plate to the backstop with white spray liner if available.
8. Place a cone approx 175ft from home plate on each foul line.
9. Make sure to place ALL equipment back into box and lock the box before leaving. Place the orange base plugs back on the base anchors. Any equipment that goes missing or is lost is the responsibility of the home team. A fine will be levied for the replacement of any missing equipment.
10. Both teams are responsible for any garbage that is produced.
11. The key for the lights is in the box. Also the key for the lights at Burnaby North is also the key for the gates in the dugout. Please ensure you lock the dugouts after you leave at Burnaby North.